Electrical hazards
Compiled text through Sep 15, 2021
Register checked through Jul 29, 2026
No later Register activity identified in this check.
Dates and status
- Compiling agency
- Executive Department
- Text status
- Source receipt
- Compiled text through
- Sep 15, 2021
- Register checked through
- July 29, 2026/Vol. XLVIII, Issue 30 (2026-07-29)
- Activity status
- No later Register activity identified in this check.
- Source snapshot
- Jun 6, 2026
The electrical systems of projects are properly designed and installed to eliminate all fire hazards. The danger generally develops from improper use. Special note should be made of the following items:
Only fuses of the proper amperage for the control of the circuit are to be used. To prevent the use of improper size fuses by tenants, authorities should install fustats and adapters of the proper amperage, usually 15 amperes, in the fuse box located in apartments. Tenants should also be cautioned on use of electrical appliances so as not to overload circuit.
All electrical equipment should be kept in a state of good repair. All motors, including oil burner and heat distribution motors, should be cleaned, oiled and checked at frequent intervals as recommended by the manufacturer. Electrical equipment having heating elements should be used with care and safely placed so as not to set fire to adjoining surfaces. All electrical equipment should bear the Underwriters' Label of Approval. Frayed or worn cords on portable devices should be replaced. Extension cords should be used only to meet temporary requirements and should not be used as a substitute for permanent wiring.
Electrical equipment, such as washing machines, dryers, commercial refrigerators, ranges, etc., present a shock hazard unless grounded in an acceptable manner. Certain portable electric tools, such as drills, saws, etc., also present a shock hazard unless properly grounded, usually by means of a multi-prong plug properly connected to the electrical source.